Double Action Hydraulic Baling Press (Model No. : HEW-1073/II)
 
 
Technical Characteristics
Description

15"X12"
A

18"X12"
B
20"X12"
C
Charging Box
Inch
50X15X18
55X18X20
60X20X20
Pressed bale
Inch
15X12XT
18X12XT
20X12XT
Bale Weight
Kg.
25-30
35-40
45-50
Prod./Shift (Approx.)
Ton.
4-5
5-6
6-7
Electric Motor
H.P.
15
20
20

   T = Thickness of pressedbale (Variable)
 

Salient Features

  • Highly Automated but very simple in operation through two nos. Manually operated Direction Control Value. One to operate the top lid and another to press the scrap.
  • Single compact unit mounted over channel, Front Door Operation Manually (Closing & Opening).
  • No Civil Foundation is required.
  • The above data are indicative and not binding.

Optional Features (Against Charges)

  • Replaceable wear-resistance plates can be provided for long life of the feeding chamber.
  • Shearing blades can be provided on the Edges of the Chamber and Top Lid to shear the excess and over size material.
  • Heat exchanger to keep the oil cool.
 
 
DOUBLE ACTION - Model No.: HEW-1073/III
 
 
Double Action Scrap Baling presses manufacturer of exporter hydraulic and engineering works.
 
 
 
Technical Characteristics
Description   15"X18 18"X12" 20"X12"
Charging Box Inch 50X15X20 55X18X20 60X20X20
Pressed bale Inch 15 X 18 X T 18 X 12 X T 20 X 12 X T
Bale Weight Kg. 30-35 35-45 45-55
Prod./Shift (Approx.) Ton. 4-5 5-6 6-7
Electric Motor H.P. 15 20 20

   T = Thickness of pressedbale (Variable)

Salient Features

  • Highly Automated but very simple in operation through three nos. Manually operated Direction Control Value. One to operate the top lid, another to press the scrap and third to operate front lid.
  • Front Door Operation Hydraulic through seperate Direction Control Value (Closing & Opening).
  • Pressed Bundle ejection from front side.
  • No Civil Foundation is required.
  • The above data are indicative and not binding.
Optional Features (Against Charges)
  • Replaceable wear-resistance plates can be provided for long life of the feeding chamber.
  • Shearing blades can be provided on the Edges of the Chamber and Top Lid to shear the excess and over size material.
  • Heat exchanger to keep the oil cool.